Rocktron Velocity 300, 300W (150Wx150W) Power Amp rackový gitarový zosilňovač

The Velocity 300 is the latest in our line of Velocity power amps. The Velocity 300 provides 150 watts/channel when used in stereo applications or 300 watts mono bridged into a 8 ohm load!

The Velocity 300 has a unique "Reactance" circuit that actually replicates the output impedance of tube amplifiers-so you can get the same great sound that a tube amplifier delivers in a reliable solid state design. And, because it is a variable control, you can customize your Velocity 300 to sound like any of your favorite tube amps. Best of all, this feature is available in the mono bridged mode too!

In addition, the Velocity 300 has "Definition" controls to give you that little bit of edge you need to bring your playing out in the mix. It also has automatic short circuit protection, which detects problems and shuts down the amplifier before any internal damage can be done.


Other Features:
115/230 VAC voltage selector switch.
An AC power detect circuit, which ensures that the amplifier outputs shut down first when AC is removed. This will guard against any thumps or pops that could otherwise occur, potentially damaging speakers when power is cut to the amplifier.
Differential input buffers to eliminate ground loop hum coming from the power amp
Output Power (Unbridged) - 150 watts per channel @ 4 ohms (both channel driven), 75 watts per channel @ 8 ohms (both channels driven), 37.5 watts per channel @ 16ohms (both channels driven)
Output Power (Bridged) - 300 watts @ 8 ohms, 170 watts @ 16 ohms


Maximum Input - +20dBu
Frequency Response - ?1dB, 20Hz - 20kHz
Dynamic Range: over 100dB
Distortion (Typical) - 0.1% THD
INPUT Channel 1 ( Mono bridged): 6,3mm Standard Mono Jack
INPUT Channel 2: 6,3mm Standard Mono Jack
OUTPUT CHANNEL 1: 2 x 6,3mm Standard Mono Jack
OUTPUT CHANNEL 2: 2 x 6,3mm Standard Mono Jack
Power: 230 V
Dimensions (W x D x H): 483mm x 241mm x 44mm
Weight: 7.80kg