Fluid Audio F5 White

Fluid Audio F5 White

Fluid Audio's remarkably affordable F5 monitor brings a lot of technology and value to the table. The amplifier rear panel has not only XLR and TRS inputs for more professional applications, we have also included an RCA input for more "consumer friendly" applications. The amplifier has a generous heat sink for long mixing sessions. Most monitors have their amp heat sinks inside the cabinet where all the heat is generated and cannot escape. The F5 amplifier ICs are mounted directly to the heat sink, so heat can transmit harmlessly away from the drivers and internal circuitry. The amp also has something no other monitor in its class can boast - A standby circuit that shuts down the amp after 20 mins of non use.

Specifications:

• Frequency response: 49 Hz – 22 kHz (+/-3dB)
• Crossover frequency: 2.5 kHz
• Low-frequency amplifier power: 40 watts
• High-frequency amplifier power: 30 watts
• Signal-to-noise: > 100 dB (typical A-weighted)
• Polarity: Positive signal at + input produces outward LF one displacement
• Input impedance: 20 k ohms balanced, 10 k ohms unbalanced
• Input sensitivity: 85 mV pink noise input produces 90dBA output SPL @ one meter with volume control at maximum (101dB Max SPL)
• Power: 115V ~50/60 Hz or 230V~50/60 Hz user switchable
• Protection: RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
• Cabinet: Vinyl-laminated MDF
• Size (single monitor): 10.25” x 6.9” x 7.7” / 260 x 176 x 195 mm
• Weight (single monitor): 11 lbs / 5 kg