Procab REF400/10-H drôt

Procab REF400/10-H

Procab's REF400 combines power and signal, being the perfect solution when you need power and audio-signal at one place like for active loudspeakers. The main advantage of the REF400 is that when the cable is plugged in the speaker, the unique tension release cable-loop makes sure there will be no pulling force on the connectors. While other cables are plugged in, all the pulling force comes to the connector which can cause cable damage. This is not the case with the REF400 because when the cable is hanging down when it is plugged in the tension release cable-loop that is attached to the speaker, it will absorb the pulling-force and there will be no force on the connector.

• REF400/10-H: 10 METER - HANGER
• Shuko Power male & XLR female to Euro Power female & XLR male
• Cable Type : PAC400
• Power cable : 3 x 1 mm²
• Signal cable : 2 x 0.12 mm
• Outer jacket diameter : 14.5 mm

PAC400 SPECIFICATIONS
• Filling : Cotton yarn
• Separator : Cotton paper
• Outer Jacket Dimensions : ø 14.5 mm
• Power Cable : .
• Inner conductor : BC 36 x 0.19 (Oxygen Free Copper)
• Inner conductor section : 1.0 mm² (17 AWG)
• Insulation : PE ø 2.4 mm
• Number of conductors : 3
• Inner Jacket Dimensions : ø 6.5 mm
• Signal Section : .
• Inner Conductor : BC 11 x 0.12 (Oxygen Free Copper)
• Inner Conductor Section : 0.125 mm² (26 AWG)
• Insulation : PE ø 1.0 mm
• Shielding : BC 33 x 0.12 (Oxygen Free Copper)
• Inner Jacket dimensions : ø 3.5 mm