Yamaha RIO 3224 D

Yamaha Rio3224-D Dante I/O Box : 32 in x 16 out plus 4 Stereo AES/EBU Outs

The “natural, musical sound” that was a key element of the CL Series design policy is carried on without compromise in the R Series. Mechanical construction, circuit board layout, power supply, grounding, and parts selection have all been executed with meticulous attention to detail and quality, combined with exhaustive performance and listening tests at each stage of development. The result is eminently natural, musical sound.
Yamaha Rio3224-D racks employ Dante network audio protocol for exceptional flexibility and freedom in setup and placement, while delivering natural, musical sound that brings out the full sonic potential of mixing consoles and other system components. They also allow redundancy for the utmost reliability in any application. Four models accommodate a wide range of I/O requirements

• Sonic performance that brings out the best in any system
• Dante network protocol contributes to greater system scalability and flexibility
• Support for CL series consoles as well as other Dante based systems


Specifications:
• Sampling frequency rate: Internal: 44.1kHz, 48kHz, 88.2kHz, 96kHz External: 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% ( ±200ppm) / 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% ( ±200ppm) / 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% ( ±200ppm) / 96kHz: +4.1667%, +0.1%, -0.1%, -4.0%

• Signal delay: Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz

• Total harmonic distortion: Less than 0.05% 20Hz-20kHz@+4dBu into 600?, Fs=44.1kHz, 48kHz / Less than 0.05% 20Hz-40kHz@+4dBu into 600, Fs=88.2kHz, 96kHz INPUT to OUTPUT, Input Gain = Min.

• Frequency response: +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz / +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz

• Dynamic range: 108dB typ., INPUT to OUTPUT, Input Gain = Min

• Crosstalk: -100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min.

• Power requirements: US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz

• Power consumption: 120W

• Dimensions:
Width: 480mm (18 7/8in)
Height: 232mm (9 1/4in)
Depth: 361.5mm (14 1/4in)
Weight: 12.4kg (27.3lb)