DPA d:vote 4099 Bass prvotriedny mikrofón

DPA d:vote 4099-B

Building upon the award-winning 4099 series, d:vote features an enhanced shockmount design, and a choice of detachable cables of two diameters and versatile gooseneck extender. Much more natural sounding than any internal microphone or pickup, d:vote rejects unwanted noise and accurately captures the true voice of acoustic instruments. From piano, guitar and strings to woodwinds, brass and drums, d:vote sounds equally impressive on them all. Now, just one microphone model can beautifully reinforce an entire orchestra. These cost-effective mics are handcrafted in Denmark for a wide array of musical instruments, complete with gentle, discreet mounting solutions and robust carrying cases. All d:vote 4099 condenser microphones feature supercardioid polar patterns for high rejection and superior gain-before-feedback, while retaining a highly uniform off-axis frequency response.

• Superior gain-before-feedback
• Natural sound – easy to blend with pick-up
• Flexible and easy mounting
• Mount has no impact on acoustic sound
• Detachable cable and versatile gooseneck extender

Specifications for 4099B Clip Microphone for Bass

• Directional characteristics: Supercardioid
• Principle of operation: Pressure gradient
• Cartridge type: Pre-polarized condenser
• Frequency range: 20 Hz to 20 kHz
• Frequency range, ± 2 dB, 20 cm (7.9 in) distance: 80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz
• Sensitivity, nominal, ±3 dB: 6 mV/Pa; -44.5 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
• S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 71 dB
• Total harmonic distortion (THD): < 1 % up to 123 dB SPL peak; < 1 % up to 120 dB SPL RMS sine
• Dynamic range: 100 dB
• Max. SPL, peak before clipping: 142 dB
• Output impedance: From MicroDot: 30 to 40 ohm, from DAD6001: 100 ohm
• Cable drive capability: 300 m (984 ft) with DAD6001
• Output balance principle: Signal balanced with DAD6001 XLR adapter
• Common Mode Rejection Ratio (CMRR): > 60 dB at 50 Hz to 15 kHz with DAD6001 XLR adapter
• Power supply: Min. 5 V to max. 50 V through DPA adapter for wireless systems; 48 V phantom power ±4 V with DAD6001 • • XLR adapter
• Current consumption: 1.5 mA; 3.5 mA with DAD6001 XLR adapter
• Connector: MicroDot
• Color: Black
• Weight: 33 g (1.16 oz)
• Microphone length: 45 mm (1.8 in)
• Cable length: 1.8 m (6 ft)
• Polarity: Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
• Operating temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
• Relative humidity: Up to 90 %
• Gooseneck, length: 140 mm (5.5 in)