Alesis M1 Active 520 USB štúdiové monitory

Alesis M1 Active 520 USB Nearfield Studio Monitors with USB Audio I/O

M1Active 520 USB is a studio monitoring system designed for professional studio use with an internal digital-audio interface. M1Active 520 USB is a pair of active, bi-amplified, two-way reference monitors that play from 20,000 Hz all the way down to 56 Hz to cover nearly all frequencies audible to human ears. You can take USB digital signal out of your computer via USB and input it to M1Active 520 USB for low-noise, low-distortion performance. Priced attractively for any studio's budget, M1Active 520 USB perform with linearity, clarity, and neutrality typically reserved for monitors that cost much more.

Specification:
• Low-frequency driver: 5” lightweight, magnetically-shielded, ultra-stiff polypropylene cone with rubber surround and high power handling voice coil
• High-frequency driver: one-inch silk dome with magnetic shielding
• Frequency Response: 56 - 20,000 Hz
• Power: 30 W per channel RMS
• Signal-to-Noise Ratio: >90dB weighted
• Digital Conversion: 16-bit delta sigma, 44.1kHz or 48kHz sampling rate
• Inputs: two balanced-1/4”
• Polarity: Positive signal on “+” pin creates forward cone displacement
• Input Impedance: 10k ohms
• Input Level: -10dBV nominal, balanced
• Dynamic Range: >80dB
• Dimensions: (WxDxH) 7.25" x 8.875” x 10.625”