Art PS 4x4 Pro

Art PS4x4 PRO

The 4x4 PRO SERIES Power Distribution Systems from ART. Built on the foundation of the popular 4x4s, the PRO SERIES are durably constructed, reliable power conditioners for use in many applications. Wherever power management system is required, the 4x4 PRO SERIES provide the surge protection you need to keep your rack safe from unwanted disruption. By using both Common Mode and Differential Mode topologies in series for the filter design you are able to block virtually all of the unwanted noise that is between the AC line and ground, and also the two sides of the AC line. This has the additional benefit of reducing ground loop problems in your system. High frequency noise currents in particular are highly attenuated in both directions so that any line noise that could be generated by one of your components is not allowed to get back into your main A.C. wiring so if you use a number of PRO SERIES Power Conditioners in your setup, you can distribute and isolate the noisy components from the sensitive components in your system. Additionally, any signals above 10kHz are filtered from the line with over 40dB of attenuation above 100kHz and beyond.

• APF - Advanced Power Filtering
• Pull Out Light Pipes with AutoOff and Dimmer
• Easy to read LED Input Voltage and Current Metering
• Power Capacity of 1800 Watts
• Surge & Spike Protection
• EMI & RFI Filtering
• 8 Rear Outlets with Power Adapter Friendly Positioning
• One Front-mounted Unswitched Power Outlet
• Rear Mounted Gooseneck Light Source
• Circuit Breaker: 15 Amp
• Power Outlets: Eight Rear Outlets
• Power Switch: Front Location - On/Off
• Power Switch Illumination: Yes - In “On” Position
• Circuit Breaker: Front Location
• Filtering: EMI, RFI, Common Mode
• Differential Mode in Series
• Protection Circuit: Surge & Spike Protection
• Construction: All-Steel Chassis
• Light Pipes: (SP, PS only) 2 Front Pull-Out, Shock Mounted
• Metering: (SP, PS only) Input Voltage
• Dimensions: 483x200x45mm
• Weight: 2,2kg