Audix D2 nástrojový mikrofón

Audix D2

The D2 is used for stage, studio and broadcast applications. It is designed with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a VLM diaphragm for natural, accurate sound reproduction.
The D2 is an excellent choice for miking instruments with a percussive nature such as rack toms, congas, saxophones, guitar cabinets and brass. Transformer less design, low impedance and balanced output insure that the D2 will perform interference-free.

• Transducer Type: Dynamic
• Frequency Response: 80 Hz - 18 kHz
• Polar Pattern: Hypercardioid
• Output Impedance: 250 ohms
• Sensitivity: 1.2 mV / Pa @ 1k
• Capsule Technology: VLM Type B
• Off Axis Rejection: >30 dB
• Maximum SPL: ≥144 dB
• Power Requirements: None
• Connector: Switchcraft or Audix male XLR connector
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
• Housing / Finish; Machined Aluminum / Black Hard Coat
• Weight; 128 g / 4.5 ounces
• Length: 100 mm / 3.9 inches