JBL EON 15P reproduktor

JBL EON 15P active speaker 180W
JBL EON 15P is a 15" active speaker with neodymium magnet for light weight and reduced distortion. It is perfect for live sound reinforcement, speech, vocals, and music playback in entertainment, A/V, and institutional venues – especially when ease of use, audio quality and portability are important factors. Amplification and monitoring for electronic musical instruments.

Specifications:
•
1" (throat diameter) JBL compression driver with 1.75" titanium diaphragm and ferrofluid
cooling.

• Internally Bi-amplified – 130 watts low frequency and 50 watts hi-frequency (bi-amplified) – actual power delivered to the drivers.

• Balanced, Mic/Line switchable, XLR input.
•
Loop-through XLR output. “Daisy-chain” additional EON speakers.
•
90° x 60° (nominal) constant directivity horn.
• Thermomaster Total Thermal Management System. A single piece, cast-aluminum baffle integrates the woofer frame, horn, and amplifier heat sink. Air movement in the finned ports dissipates heat – no internal or external cooling fans are required.
•
Rugged, lightweight (47 lbs.), co-polymer enclosure.
• Integral 35 mm pole mount receptacle with securing thumbscrew.
•
Multi-angle enclosure for front of house or stage monitor application.
•
Integral attachment points for optional JBL and third-party mounting brackets.
• Freq. Range (-10 dB): 47 Hz - 18 kHz
• Freq. Response (±3 dB): 65 Hz - 16 kHz
• Horz. Coverage (-6 dB): 90° Nominal
• Vert. Coverage (-6 dB): 60° Nominal
• Rated Maximum SPL: 127 dB, @ 1 m (3.3 ft)
• Dimensions (H x W x D): 686 mm x 430 mm x 444 mm
• Net Weight: 21 kg
• LF Driver: Integral frame with 15" (380 mm) driver, neodymium magnet, 2" Differential Drive voice coil.
• HF Driver: JBL 2418H-1 1" (throat diameter) compression driver with 1.75" diameter titanium diaphragm.
• Ferro-fluid cooled.
• Amplifier Power LF: 130 watts @ low-frequency driver impedance, <.1% THD.
• Amplifier Power HF: 50 watts @ high-frequency driver impedance, <.1% THD.
• Input Sensitivity: -55 dBu to -2 dBu for rated output (Mic/Line switch in MIC position) +9 dBu to +26 dBu for rated output (Mic/Line switch in LINE position)
• Enclosure Material: Aluminum baffle, gray co-polymer enclosure and protective bezel
• Audio Connectors: Input XLR/F, balanced, LoopOut XLR/M, balanced,
• Crossover Freq.: 1.5 kHz.
• AC Input: Switchable 115 - 230 VAC (±10%), 50 - 60 Hz.,175 watts rating per UL, detachable IEC (male) power connector.