e-mail: [email protected]

Otváracia doba
Pondelok - Piatok 9:30 - 18:00
Sobota 9:30 - 14:00

RODE NT1 + AI-1 Interface Bundle Súprava kompresívneho štúdia

Názov:

RODE NT1 + AI-1 Interface Bundle Súprava kompresívneho štúdia

Výrobca:

Rode

Id tovaru / Kód:

171420 / RODE-NT-1-AI-BUNDLE

Množstvo na sklade:0 pcs.
Pozor! Cena za tento tovar sa mohla zmeniť. Aktuálnu cenu a čakaciu dobu si môžete dohodnúť s opatrovníkom výrobku.
Správca výrobku:
Marcin Zdziabek, tel. +42 0234261768,
email: [email protected]
RODE NT1 + AI-1 Interface Bundle Súprava kompresívneho štúdia

Rode NT1 + AI Interface Bundle

The NT1 is a revolutionary new 1" diaphragm condenser microphone from RØDE.

Although the body of the new NT1 closely resembles the NT1-A, the microphone has been completely redesigned from the ground up, with the only shared component being the mesh grille.

RØDE’s design engineers approached the NT1 as a marriage of innovation and tradition, starting with the capsule which is a completely new design. Codenamed the HF6, it is the perfect example of RØDE’s fusion of artistic design approaches and cutting-edge manufacturing techniques, and features a sound signature reminiscent of the famous microphones of old while at the same time exhibiting extremely low noise.

It has been developed with a focus on detailed midrange response, coupled with silky smooth high frequencies, and warm, round, bass reproduction to make the NT1 an absolute standout in its class.

In another world-first for RØDE, the transducer itself is suspended inside the microphone using Rycote’s industry-leading Lyre system, minimizing external vibrations at the capsule level. The capsule is then married to high-grade electronics that have been designed to provide the lowest noise level of any studio microphone available. The NT1 is an incredibly quiet microphone, measuring only 4.5dBA of self-noise.

Its body is machined from 6061 aluminium and then nickel plated for resistance against corrosion. Finally it is coated in a durable, military-grade ceramic layer, using advanced electrostatic application techniques developed by RØDE to ensure an extremely hard wearing finish that is resistant to scratches or marks.

The NT1 is supplied with the revolutionary new RØDE SMR shock mount. Featuring a unique double-Lyre suspension system, the SMR enhances the existing superior vibration cancellation of Rycote’s Lyre system by using a smaller inner Lyre to act as a tensioning element. This maintains each Lyre in the neutral position where it is most efficient at cancelling vibration. The SMR’s removable all-metal pop filter is as effective as it is visually striking, providing an integrated solution for plosive protection that is easily washable and designed to last as long as the shock mount and microphone.

The AI-1 USB Audio Interface adds studio-quality input and output capabilities to your computer, making home recording easier than it's ever been. With its high quality NeutrikTM combo jack input and discrete Class-A preamp, you’ll be able to connect either a microphone, guitar or a line level instrument, such as a synthesizer.

Specifications:

NT-1:
• Acoustic Principle: Pressure Gradient
• Active Electronics: JFET impedance converter with bipolar output buffer
• Capsule: 1.00"
• Polar Pattern : Cardioid
• Address Type: Side
• Frequency Range: 20Hz - 20kHz
• Output Impedance: 100Ω
• Maximum SPL: 132dBSPL
• Maximum Output Level: 8.0mV (@ 1kHz, 1% THD into 1KΩ load)
• Sensitivity: -29.0dB re 1 Volt/Pascal (35.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
• Equivalent Noise Level (A-weighted): 4dBA
• Power Options: +24V phantom power+48V phantom power
• Weight: 440.00g
• Dimensions: 187.00mmH x 50.00mmW x 50.00mmD
• Output: XLR Output

AI-1 Interfacae;

• Desktop USB audio interface with low-noise Class-A discrete preamplifier
• Sampling rate of up to 96kHz/24-bit
• One combo XLR-1/4" combo input
• Two balanced 1/4" monitor outputs
• One discrete, studio-quality headphone output
• Phantom power for condenser microphones
• Zero-latency monitor mode
• USB bus powered
• USB Type-C connector for future proof operation
• Rugged body with Satin Black Finish
• Class compliant—no drivers required
• Includes Ableton Live Lite
• Includes USB cable
• Analog Inputs and Outputs: Input: 1 x Neutrik XLR-1/4" / 6.35 mm combo
• Outputs: 2 x 1/4" / 6.35 mm (impedance balanced), 1 x 1/4" / 6.35 mm (headphones)
• Computer Connectivity: USB Type-C
• Form Factor: Desktop
• Mic Preamps: 1
• Phantom Power: Yes
• Bit Depth: 24-bit
• Sample Rates: 44.1, 48, 88.2, 96 kHz
• Zero-Latency Direct Monitoring: Yes
• USB Bus Powered: Yes
• OS Requirements Mac OS X 10.10 or later
• Windows 7 or later
• Dynamic Range: 104 dBu
• Equivalent Noise: Equivalent Input Noise at Maximum Gain: -128 dBA (source impedance 150 ohms, 20 Hz to 20 kHz, A-weighted)
• Frequency Response: 20 Hz to 20 kHz (better than ±1 dB, measured after ADC)
• Gain Range: 0 to 45 dB
• Input Impedance: XLR Mic Input: 1.3 kOhms
• Instrument Input: 0.9 MOhms
• Monitor Outputs: Max Output Level: -6 dBu
• Headphone Output: Max Output Power (at 1% THD):
• 32 Ohms,: 24 mW,
• 300 Ohms,: 245 mW
• Dimensions (D x W x H): 3.9 x 4.9 x 1.5" / 100.0 x 124.0 x 38.0 mm
• Weight: 19.8 oz / 561.3 g

Názor na výrobok RODE NT1 + AI-1 Interface Bundle Súprava kompresívneho štúdia

Youtube


Cena s DPH
373 EUR
Free delivery0 EUR